Interesting. The Former guy does not like talking about other people unless he can sneer down and then blow about how fantastic he is. He probably didn't want to talk about what iden was doing at all, becasue its admitting that Biden is DOING stuff, and that means HIS perfect Presidency looks flat by comparison. Remember he cant stand even implied critisism.
Its why he rarely used the POTUS account as he couldn't take even the implication of comparison with other presidents, as he knew he would come up short in the comparison
Its also interesting that someone else would be controlling his narritive, which he would not like at all as it again implies critisism and loss of control. And loss of control means he is second class and a loser. Big League.
Poor Donnie. Such a limited bunny, I don’t know if I’ve ever heard him be interesting, say something he hasn’t already said a million times, or directly answer a question.
roadscholar wrote: ↑Tue May 25, 2021 8:30 pm
I prefer a Forstner bit.
Me, too, as long as I have a drill press nearby. My most recent experience using a Forstner bit with a handheld electric drill resulted in holes that defeated the purpose of using a Forstner bit. Fortunately, it wasn't for fine furniture...
roadscholar wrote: ↑Tue May 25, 2021 8:30 pm
I prefer a Forstner bit.
Me, too, as long as I have a drill press nearby. My most recent experience using a Forstner bit with a handheld electric drill resulted in holes that defeated the purpose of using a Forstner bit. Fortunately, it wasn't for fine furniture...
I have successfully used a forstner bit in a handheld drill, but, you're right, they work better in a drill press. This is especially true of the larger sizes, above an inch in diameter.
I’ve used them hand-held in bigger sizes, but 1) you need to be really good at eyeballing holding the drill at pretty close to 90 degrees, 2) you need enough power to maintain decent speed (they don’t perform well slow), which means 3) if you get a sudden jam, the drill is beefy enough to twist you up good.
So anything I can bring to the drill press, I do. But sometimes ya just gotta bring the tool to the work.
The bitterest truth is more wholesome than the sweetest lie.
roadscholar wrote: ↑Wed May 26, 2021 5:37 pm
I’ve used them hand-held in bigger sizes, but 1) you need to be really good at eyeballing holding the drill at pretty close to 90 degrees, 2) you need enough power to maintain decent speed (they don’t perform well slow), which means 3) if you get a sudden jam, the drill is beefy enough to twist you up good.
So anything I can bring to the drill press, I do. But sometimes ya just gotta bring the tool to the work.
Off Topic
My husband texted me this picture just yesterday. He’s finally able to use his drill press again now that he’s got a shop large enough to change his mind in (he was showing me his laser sight).
E5BA0259-2BD5-4D70-8A1E-D2029AF7957B.jpeg (121.53 KiB) Viewed 2740 times
"Hey! We left this England place because it was bogus, and if we don't get some cool rules ourselves, pronto, we'll just be bogus too!" -- Thomas Jefferson
Ooh! I want that. Thank you; I didn’t know they existed.
Is it after-market, or did it come with the machine?
Off Topic
It’s built-in. He has a Powermatic drill press, and that feature was one of the reasons he bought that model. It’s spot-on.
"Hey! We left this England place because it was bogus, and if we don't get some cool rules ourselves, pronto, we'll just be bogus too!" -- Thomas Jefferson
Ooh! I want that. Thank you; I didn’t know they existed.
Is it after-market, or did it come with the machine?
Off Topic
It’s built-in. He has a Powermatic drill press, and that feature was one of the reasons he bought that model. It’s spot-on.
My drill press has the laser cross-hairs as well. It is an inexpensive ($260), 12-inch benchtop model from Menard's. The laser works well. The problem is that, with larger diameter forstner bits, the bit itself obscures the laser.
This is becoming a fairly common feature on the mid-range to high-end drill presses.
We got a $30 after-market drill press laser for the one at the studio. Works great but has to be tightened periodically. I'd give you the brand name but it moved to NC with one of the artists.
With Memorial Day Weekend coming up, tomorrow people start driving in the biggest automobile days of the year. I’m sorry to say the gasoline prices that you will be confronted with are far higher than they were just a short number of months ago where we had gasoline under $2 a gallon. Remember as you’re watching the meter tick, and your dollars pile up, how great of a job Donald Trump did as President. Soon Russia and the Middle East will be making a fortune on oil, and you will be saying how good it was to have me as your President. Wasn’t it great to be energy independent, but we are energy independent no more. Shame, shame, shame. Other than that, have a great Memorial Day Weekend!
It's all about how great he is, but he obviously doesn't know a damn thing about how oil/gas prices work.(hint: it's not supply and demand -- it's the futures market manipulating it/traders -- ask Eddie Murphy to explain frozen OJ futures).
neonzx wrote: ↑Thu May 27, 2021 2:12 pm
It's all about how great he is, but he obviously doesn't know a damn thing about how oil/gas prices work.(hint: it's not supply and demand -- it's the futures market manipulating it/traders -- ask Eddie Murphy to explain frozen OJ futures).
I did....and it cost me one dollar....
"He sewed his eyes shut because he is afraid to see, He tries to tell me what I put inside of me
He's got the answers to ease my curiosity, He dreamed a god up and called it Christianity"
neonzx wrote: ↑Thu May 27, 2021 2:12 pm
It's all about how great he is, but he obviously doesn't know a damn thing about how oil/gas prices work.(hint: it's not supply and demand -- it's the futures market manipulating it/traders -- ask Eddie Murphy to explain frozen OJ futures).
I did....and it cost me one dollar....
Donny Jr's not gonna get the GI Joe with the kung fu grip.