The General thread for Computers And Internet
- John Thomas8
- Posts: 5318
- Joined: Mon Feb 22, 2021 7:42 pm
- Location: Central NC
- Occupation: Tech Support
The General thread for Computers And Internet
I've had my brother laser printer for around 18 months. Still on the factory toner cartridge, print out a dozen sheets (two sided) a month.
The General thread for Computers And Internet
Same here. Black dry toner. Far fewer moving parts, too. No muss, no fuss. Just works.
- keith
- Posts: 3855
- Joined: Mon Feb 22, 2021 10:23 pm
- Location: The Swamp in Victorian Oz
- Occupation: Retired Computer Systems Analyst Project Manager Super Coder
- Verified: ✅lunatic
The General thread for Computers And Internet
18 months is a long time for the manufacture to keep a particular laser cartridge form factor. By the time you go to chase up a new one they will have stopped making them and new 'old stock' will cost a fortune. Using refilled aftermarket supplies is hit and miss. My old HP color laser was always leaking toner all over the place from refilled and/or non-genuine cartridges. The aftermarket ones cost $80 apiece (so times 4 for 4 colors), while new original ones were pushing $200. Towards the end, genuine ones were completely unobtanium.John Thomas8 wrote: ↑Sun Apr 21, 2024 3:18 am I've had my brother laser printer for around 18 months. Still on the factory toner cartridge, print out a dozen sheets (two sided) a month.
I now run a Brother Ink Jet Ecotank or what ever they call it - super efficient with ink. I've had it probably 6 years now and am on the second set of cartridges.
Be assured that a walk through the ocean of most souls Would scarcely get your feet wet
- John Thomas8
- Posts: 5318
- Joined: Mon Feb 22, 2021 7:42 pm
- Location: Central NC
- Occupation: Tech Support
The General thread for Computers And Internet
I stocked up from Amazon. I''m 62, if I keep it clean I figure my son will inherent it.keith wrote: ↑Sun Apr 21, 2024 3:37 am18 months is a long time for the manufacture to keep a particular laser cartridge form factor. By the time you go to chase up a new one they will have stopped making them and new 'old stock' will cost a fortune. Using refilled aftermarket supplies is hit and miss. My old HP color laser was always leaking toner all over the place from refilled and/or non-genuine cartridges. The aftermarket ones cost $80 apiece (so times 4 for 4 colors), while new original ones were pushing $200. Towards the end, genuine ones were completely unobtanium.John Thomas8 wrote: ↑Sun Apr 21, 2024 3:18 am I've had my brother laser printer for around 18 months. Still on the factory toner cartridge, print out a dozen sheets (two sided) a month.
I now run a Brother Ink Jet Ecotank or what ever they call it - super efficient with ink. I've had it probably 6 years now and am on the second set of cartridges.
- Reality Check
- Posts: 2305
- Joined: Mon Feb 22, 2021 3:46 pm
- Verified: ✅ Curmudgeon
- Contact:
The General thread for Computers And Internet
When I was doing a lot of consulting from home I had to be able to print and scan 11 x 17 engineering drawings so I bought a Borther ink jet that woyld do all of those things. As long as I used it frequently it was fine. However, as my work slowed down I started having trouble with the print heads drying up. Eventually it got so bad that no cleaning kit would fix it and I had to trash it. I bought a $200 HP color laser at Costco on sale. Since 2018 it has performed well despite sitting for 5 months while we are in Colorado every summer.
- Shizzle Popped
- Posts: 4914
- Joined: Mon Feb 22, 2021 1:53 pm
- Location: South of Circle City
- Verified: ✅
The General thread for Computers And Internet
We had the same exact problem with our Brother large format inkjet. We bought an Epson ink tank large format printer last year that's been fine so far but I'm crossing my fingers that we don't have the same problem as Foggy. I will say that we use the Epson more. I think it's because we don't have to wait for it to warm up and I don't have to fight clogged print heads every other time we use it.Reality Check wrote: ↑Sun Apr 21, 2024 9:33 amWhen I was doing a lot of consulting from home I had to be able to print and scan 11 x 17 engineering drawings so I bought a Borther ink jet that woyld do all of those things. As long as I used it frequently it was fine. However, as my work slowed down I started having trouble with the print heads drying up. Eventually it got so bad that no cleaning kit would fix it and I had to trash it. I bought a $200 HP color laser at Costco on sale. Since 2018 it has performed well despite sitting for 5 months while we are in Colorado every summer.
The best printer I ever owned was an early HP Laserjet. That thing was a tank and ran for years while hardly ever running out of toner. But Mrs. Shizzle wanted something that could print color and scan so one of the kids got a really nice hand me down.
"Let us tenderly and kindly cherish, therefore, the means of knowledge. Let us dare to read, think, speak, and write."
John Adams
John Adams
- keith
- Posts: 3855
- Joined: Mon Feb 22, 2021 10:23 pm
- Location: The Swamp in Victorian Oz
- Occupation: Retired Computer Systems Analyst Project Manager Super Coder
- Verified: ✅lunatic
The General thread for Computers And Internet
Yeah, I agree the old mono HP laserjets were the bees knees. But when you go to color... hoo boy.
Since I dumped the HP color laser, I've had a Brother inkjet MFC that lasted 10 years without a hiccup until a cheap 3rd party refill cartridge 'exploded' all over the insides.
I replaced that with my current Brother MFC ecotank and it has been flawless.
Since I dumped the HP color laser, I've had a Brother inkjet MFC that lasted 10 years without a hiccup until a cheap 3rd party refill cartridge 'exploded' all over the insides.
I replaced that with my current Brother MFC ecotank and it has been flawless.
Be assured that a walk through the ocean of most souls Would scarcely get your feet wet
- johnpcapitalist
- Posts: 868
- Joined: Mon Feb 22, 2021 7:59 pm
- Location: NYC Area
- Verified: ✅ Totally legit!
The General thread for Computers And Internet
My better half has one of those Brother ecotank printers and loves it. Her former 20-year-old Epson inkjet was eating a set of cartridges after less than 100 pages. The new one has been a champ, and she loves it. We just bought the XL black replacement ink filler for ~$60 (that's USD = about $4,917.52 AUD) and that should be good for at least 5,000 pages.keith wrote: ↑Mon Apr 22, 2024 3:56 am Yeah, I agree the old mono HP laserjets were the bees knees. But when you go to color... hoo boy.
Since I dumped the HP color laser, I've had a Brother inkjet MFC that lasted 10 years without a hiccup until a cheap 3rd party refill cartridge 'exploded' all over the insides.
I replaced that with my current Brother MFC ecotank and it has been flawless.
The printer cost a lot more ($350+ versus $100 for one with regular cartridges), but it's worth it for the calm that comes from not cursing the need to replace cartridges all the time. I gave up color when I bought a new work laser printer at the start of the pandemic for the same reason -- I'm tired of exorbitant ink cartridge scams -- and haven't really missed color. I can always get photos printed at Walgreens if I really want hard copies.
- MsDaisy 2
- Posts: 306
- Joined: Mon Apr 24, 2023 12:06 pm
- Location: Virginia
- Occupation: Retired Medic and a Grandma (AKA Moppie) until I die
- Verified: ✅
The General thread for Computers And Internet
Question…
My computer is an (I think)11 year old macbook pro model A1502 ——365A max. Crammed on it are 22,678 photos and 1,684 videos and now nothing can save anywhere because it’s out of space. What I need is an external hard drive to off load all that shit from my computer. What I need to know is what kind of device and what size I should get to put it all on.
My computer is an (I think)11 year old macbook pro model A1502 ——365A max. Crammed on it are 22,678 photos and 1,684 videos and now nothing can save anywhere because it’s out of space. What I need is an external hard drive to off load all that shit from my computer. What I need to know is what kind of device and what size I should get to put it all on.
The General thread for Computers And Internet
I'm a fan of G-Technologies drives. They're not the cheapest, but they're sturdy and reliable. They have also provided me with helpful tech support by phone & email, even for devices for which the warranty has expired. Look for a solid-state drive.
You'll need to worry about the kind of cable, because your ancient Macbook presumably has a USB B port, while your next Mac will have a USB C rev 2 (or later). So you'll need to think about whether you want the inconvenience of a dongle now or later. Get at least a couple of terabytes; you probably won't save much by getting a smaller drive.
And, umm .... are your photos and videos backed up anywhere?
You'll need to worry about the kind of cable, because your ancient Macbook presumably has a USB B port, while your next Mac will have a USB C rev 2 (or later). So you'll need to think about whether you want the inconvenience of a dongle now or later. Get at least a couple of terabytes; you probably won't save much by getting a smaller drive.
And, umm .... are your photos and videos backed up anywhere?
- MsDaisy 2
- Posts: 306
- Joined: Mon Apr 24, 2023 12:06 pm
- Location: Virginia
- Occupation: Retired Medic and a Grandma (AKA Moppie) until I die
- Verified: ✅
The General thread for Computers And Internet
Only in my computer as far as I knowchancery wrote: ↑Wed Apr 24, 2024 3:30 pm I'm a fan of G-Technologies drives. They're not the cheapest, but they're sturdy and reliable. They have also provided me with helpful tech support by phone & email, even for devices for which the warranty has expired. Look for a solid-state drive.
You'll need to worry about the kind of cable, because your ancient Macbook presumably has a USB B port, while your next Mac will have a USB C rev 2 (or later). So you'll need to think about whether you want the inconvenience of a dongle now or later. Get at least a couple of terabytes; you probably won't save much by getting a smaller drive.
And, umm .... are your photos and videos backed up anywhere?
- Flatpoint High
- Posts: 1424
- Joined: Mon Feb 22, 2021 11:58 am
- Location: Hotel California, PH523, Galaxy Central, M103
- Occupation: professional pain in the ass, voice actor & keeper of the straight face
- Verified: ✅
The General thread for Computers And Internet
after one too many failures, one of which took my complete collection of Miyazaki films and another which took all my audio FX/musisc, I now use SSD drives. Less likely to failchancery wrote: ↑Wed Apr 24, 2024 3:30 pm I'm a fan of G-Technologies drives. They're not the cheapest, but they're sturdy and reliable. They have also provided me with helpful tech support by phone & email, even for devices for which the warranty has expired. Look for a solid-state drive.
You'll need to worry about the kind of cable, because your ancient Macbook presumably has a USB B port, while your next Mac will have a USB C rev 2 (or later). So you'll need to think about whether you want the inconvenience of a dongle now or later. Get at least a couple of terabytes; you probably won't save much by getting a smaller drive.
And, umm .... are your photos and videos backed up anywhere?
castigat ridendo mores.
VELOCIUS QUAM ASPARAGI COQUANTUR
VELOCIUS QUAM ASPARAGI COQUANTUR
- MsDaisy 2
- Posts: 306
- Joined: Mon Apr 24, 2023 12:06 pm
- Location: Virginia
- Occupation: Retired Medic and a Grandma (AKA Moppie) until I die
- Verified: ✅
The General thread for Computers And Internet
I just googled SSD drives, DANG they go anywhere from under $100 to nearly a thousand! What size/kind would I need to be looking at?Flatpoint High wrote: ↑Wed Apr 24, 2024 3:36 pmafter one too many failures, one of which took my complete collection of Miyazaki films and another which took all my audio FX/musisc, I now use SSD drives. Less likely to failchancery wrote: ↑Wed Apr 24, 2024 3:30 pm I'm a fan of G-Technologies drives. They're not the cheapest, but they're sturdy and reliable. They have also provided me with helpful tech support by phone & email, even for devices for which the warranty has expired. Look for a solid-state drive.
You'll need to worry about the kind of cable, because your ancient Macbook presumably has a USB B port, while your next Mac will have a USB C rev 2 (or later). So you'll need to think about whether you want the inconvenience of a dongle now or later. Get at least a couple of terabytes; you probably won't save much by getting a smaller drive.
And, umm .... are your photos and videos backed up anywhere?
- Flatpoint High
- Posts: 1424
- Joined: Mon Feb 22, 2021 11:58 am
- Location: Hotel California, PH523, Galaxy Central, M103
- Occupation: professional pain in the ass, voice actor & keeper of the straight face
- Verified: ✅
The General thread for Computers And Internet
what size is your current HDD? I have two 1T SSDs one for media & one for backupMsDaisy 2 wrote: ↑Wed Apr 24, 2024 3:43 pmI just googled SSD drives, DANG they go anywhere from under $100 to nearly a thousand! What size/kind would I need to be looking at?Flatpoint High wrote: ↑Wed Apr 24, 2024 3:36 pmafter one too many failures, one of which took my complete collection of Miyazaki films and another which took all my audio FX/musisc, I now use SSD drives. Less likely to failchancery wrote: ↑Wed Apr 24, 2024 3:30 pm I'm a fan of G-Technologies drives. They're not the cheapest, but they're sturdy and reliable. They have also provided me with helpful tech support by phone & email, even for devices for which the warranty has expired. Look for a solid-state drive.
You'll need to worry about the kind of cable, because your ancient Macbook presumably has a USB B port, while your next Mac will have a USB C rev 2 (or later). So you'll need to think about whether you want the inconvenience of a dongle now or later. Get at least a couple of terabytes; you probably won't save much by getting a smaller drive.
And, umm .... are your photos and videos backed up anywhere?
castigat ridendo mores.
VELOCIUS QUAM ASPARAGI COQUANTUR
VELOCIUS QUAM ASPARAGI COQUANTUR
The General thread for Computers And Internet
You should backup your files PDQ.
The rule of thumb for backup is to get one that's 3-4 times the size of your MacBook's internal storage. Checking the specs for your model, you likely have 128, 256, or 512 gigs of storage. You'll want at least 1 Terabyte; I'd get 2T.
And you'll need to figure out your port situation. It looks as though you have Thunderbolt 2 and USB 3.0, both of which use type B connectors. It might be hard to find a drive that uses those connectors, so you'll need a dongle. I'm reluctant to give you specific advice, because it's been years since I had to puzzle through the intricacies of the change from Type B to Type C connectors, and don't recall the details.
The sales line at G-Technology can probably help you sort it out. But please, get those files backed up.
The rule of thumb for backup is to get one that's 3-4 times the size of your MacBook's internal storage. Checking the specs for your model, you likely have 128, 256, or 512 gigs of storage. You'll want at least 1 Terabyte; I'd get 2T.
And you'll need to figure out your port situation. It looks as though you have Thunderbolt 2 and USB 3.0, both of which use type B connectors. It might be hard to find a drive that uses those connectors, so you'll need a dongle. I'm reluctant to give you specific advice, because it's been years since I had to puzzle through the intricacies of the change from Type B to Type C connectors, and don't recall the details.
The sales line at G-Technology can probably help you sort it out. But please, get those files backed up.
- MsDaisy 2
- Posts: 306
- Joined: Mon Apr 24, 2023 12:06 pm
- Location: Virginia
- Occupation: Retired Medic and a Grandma (AKA Moppie) until I die
- Verified: ✅
The General thread for Computers And Internet
2 Ts okay, but what's a dongle?chancery wrote: ↑Wed Apr 24, 2024 4:18 pm You should backup your files PDQ.
The rule of thumb for backup is to get one that's 3-4 times the size of your MacBook's internal storage. Checking the specs for your model, you likely have 128, 256, or 512 gigs of storage. You'll want at least 1 Terabyte; I'd get 2T.
And you'll need to figure out your port situation. It looks as though you have Thunderbolt 2 and USB 3.0, both of which use type B connectors. It might be hard to find a drive that uses those connectors, so you'll need a dongle. I'm reluctant to give you specific advice, because it's been years since I had to puzzle through the intricacies of the change from Type B to Type C connectors, and don't recall the details.
The sales line at G-Technology can probably help you sort it out. But please, get those files backed up.
- MN-Skeptic
- Posts: 3219
- Joined: Mon Feb 22, 2021 1:03 pm
- Location: Twin Cities
The General thread for Computers And Internet
Wikipedia - "A dongle is a small piece of computer hardware that connects to a port on another device to provide it with additional functionality, or enable a pass-through to such a device that adds functionality."
So, a short cord with a USB-B on one end and a USB-C on the other. As one example.
- MsDaisy 2
- Posts: 306
- Joined: Mon Apr 24, 2023 12:06 pm
- Location: Virginia
- Occupation: Retired Medic and a Grandma (AKA Moppie) until I die
- Verified: ✅
The General thread for Computers And Internet
Okay thanksMN-Skeptic wrote: ↑Wed Apr 24, 2024 4:50 pmWikipedia - "A dongle is a small piece of computer hardware that connects to a port on another device to provide it with additional functionality, or enable a pass-through to such a device that adds functionality."
So, a short cord with a USB-B on one end and a USB-C on the other. As one example.
The General thread for Computers And Internet
Or you may be able to find a cable with an older connector on one end and a newer connector on the other. A few years ago G-Technology drives, or at least some of them, came with several different kinds of ports and a half-dozen or so different kinds of cables.
I bought a MacBook 12" in 2017 and a MacBook Air in 2020. Both of them used USB 3.1 rev. 2 ports, and I recall that there was a bothersome difference with USB 3.0 ports, which you might have. More than that I don't remember.
I bought a MacBook 12" in 2017 and a MacBook Air in 2020. Both of them used USB 3.1 rev. 2 ports, and I recall that there was a bothersome difference with USB 3.0 ports, which you might have. More than that I don't remember.
- MsDaisy 2
- Posts: 306
- Joined: Mon Apr 24, 2023 12:06 pm
- Location: Virginia
- Occupation: Retired Medic and a Grandma (AKA Moppie) until I die
- Verified: ✅
The General thread for Computers And Internet
Actually I texted my youngest son Brian Patrick mostly know as BP and bless his little knowledglble heart he's coming over on Friday to do whatever needs doing to fix the damn thing. He's a totally spoiled brat that loves and would do anything for his dearly beloved mama. And don't think I don't play on that any time any electronic shit fucks up that my demented brain can't figure out!
- northland10
- Posts: 5860
- Joined: Mon Feb 22, 2021 6:47 pm
- Location: Northeast Illinois
- Occupation: Organist/Choir Director/Fundraising Data Analyst
- Verified: ✅ I'm me.
The General thread for Computers And Internet
But what about the White Toner?
Now dead birther Hermitian/Henry made some claim regarding white toner because of course he did.
101010
- Flatpoint High
- Posts: 1424
- Joined: Mon Feb 22, 2021 11:58 am
- Location: Hotel California, PH523, Galaxy Central, M103
- Occupation: professional pain in the ass, voice actor & keeper of the straight face
- Verified: ✅
The General thread for Computers And Internet
I needed a dongle for my ethernet cable(s) for my MacBook Proschancery wrote: ↑Wed Apr 24, 2024 5:23 pm Or you may be able to find a cable with an older connector on one end and a newer connector on the other. A few years ago G-Technology drives, or at least some of them, came with several different kinds of ports and a half-dozen or so different kinds of cables.
I bought a MacBook 12" in 2017 and a MacBook Air in 2020. Both of them used USB 3.1 rev. 2 ports, and I recall that there was a bothersome difference with USB 3.0 ports, which you might have. More than that I don't remember.
castigat ridendo mores.
VELOCIUS QUAM ASPARAGI COQUANTUR
VELOCIUS QUAM ASPARAGI COQUANTUR
- keith
- Posts: 3855
- Joined: Mon Feb 22, 2021 10:23 pm
- Location: The Swamp in Victorian Oz
- Occupation: Retired Computer Systems Analyst Project Manager Super Coder
- Verified: ✅lunatic
The General thread for Computers And Internet
I think you guys are talking about USB-A not USB-B.
-B is the old peripheral connector, most often used on at the printer or scanner end. I know Apple is weird but even they wouldn't call a macbook a peripheral would they?
USB A to USB C cables are a dime a dozen, but please realize they wont make a USB 2 port move as fast as a USB 3 gen 3.2x2. Its gonna take time to move hundreds of gigs. Be prepared is all I'm saying.
Also be aware they are constantly changing the technology generation names in order to maximally confuse the consumer. What used to be called USB 2.1 (which included USB 1 and 2.0) got folded into USB 3 and has gone thru several name changes and is now called USB 3.2 gen 1. This allows manufacturers to print "USB 3" on the memory stick packages and let people think they are getting fast devices. I hate that and its gonna get worse when USB 4 arrives ennydaynow.
Here's a reddit post describing the nameing bullshittery
-B is the old peripheral connector, most often used on at the printer or scanner end. I know Apple is weird but even they wouldn't call a macbook a peripheral would they?
USB A to USB C cables are a dime a dozen, but please realize they wont make a USB 2 port move as fast as a USB 3 gen 3.2x2. Its gonna take time to move hundreds of gigs. Be prepared is all I'm saying.
Also be aware they are constantly changing the technology generation names in order to maximally confuse the consumer. What used to be called USB 2.1 (which included USB 1 and 2.0) got folded into USB 3 and has gone thru several name changes and is now called USB 3.2 gen 1. This allows manufacturers to print "USB 3" on the memory stick packages and let people think they are getting fast devices. I hate that and its gonna get worse when USB 4 arrives ennydaynow.
Here's a reddit post describing the nameing bullshittery
Be assured that a walk through the ocean of most souls Would scarcely get your feet wet
The General thread for Computers And Internet
USB B to USB C cables do exist. I've got one somewhere. But I think it it got trickier with 3.1 rev 2.
Edit: Just read your reddit explainer. Worse than I knew. A few years back I was able to figure out what I needed to know to get my new Mac to work with older hard drives, printers, and scanners, but never had the full vision. Is bad. Changing designations in midstream is very, very bad.
Edit: Just read your reddit explainer. Worse than I knew. A few years back I was able to figure out what I needed to know to get my new Mac to work with older hard drives, printers, and scanners, but never had the full vision. Is bad. Changing designations in midstream is very, very bad.